Elver Front

Brisa Elver Knives  

A handy smaller knife designed for smooth rotation in the hand.  Excellent for small game dressing, whittling, and general camp use.

Brisa puts a lot of attention to the grind and can provide two different grinds:

Flat (F)
Scandi ground to zero (ScZ).

The steels available are:
O1
Carbon Steel
Widely used American knife steel
C 0.90 Mn 1.20 Cr 0.50 W 0.50 V 0.20  Hrc 58 - 59

D2
D2 steel is one of the best knife steels. It is a tool steel and has very good hardness and wear resistance, while still maintaining some
rust resistance due to high Chromium content.

C 1.55 Mn 0.3 Si 0.3 Cr 12 Mo 1 Hrc 60 - 61

One of my customers has the following tips for EnZo blades in D2:
- if making other than slicing cuts in soft materials (not including bone or wood with knots), make sure the blade has a microbevel at the
edge, to avoid chipping. This way, even chopping will cause no problems.
- use aluminum oxide stones/waterstones for sharpening if you want quick results.
-
this steel is not stainless, so it needs to be wiped dry if it gets wet. However, D2 will not oxidize as quickly as simple carbon steel, so your
blade will remain bright with minimum care.



Elver
2204 Brisa Elver 85 O1/ScZ  $120.00  
1 in stock
Blade Length: 85mm (3.4 inches)
Blade Width: 23mm
Blade Thickness: 3.5mm
Total Length: 190mm (7.5 inches)
Weight: 140g
Ground: Scandi zero
Finish: Satin
Handle: Curly Birch with Red liners
Sheath: Dark Brown, Thick Spanish Ox Leather


 Elver
2205 Brisa Elver 85 D2/F  $120.00  
OUT OF STOCK
Blade Length: 85mm (3.4 inches)
Blade Width: 23mm
Blade Thickness: 3.5mm
Total Length: 190mm (7.5 inches)
Weight: 140g
Ground: Flat
Finish: Satin
Handle: Green Canvas Micarta with Red liners
Sheath: Bushcraft Dark Brown, Thick Spanish Ox Leather