EnZo/Brisa Trapper Full Tang Knife Blades

Please note that the blades are transitioning from the "EnZo" stamp to a "Brisa" stamp.

Our Fulltang line is especially designed for hunters and outdoorsmen. Precision made blades in every detail. We put a lot of effort
in the grind and can provide four different grinds:
Convex (Cv)
Flat (F)
Scandi with a small secondary bevel (Sc)
Scandi ground to zero (ScZ).

The steels available are:

Carbon
O1 is a widely used American knife steel.
C 0.90 Mn1.20 Cr 0.50 W 0.50 V 0.20

D2
D2 steel is one of the best knife steels. It is a tool steel and has very good hardness and wear resistance, while still maintaining some
rust resistance due to high Chromium content.
C 1.55%, Mn 0.3%, Si 0.3%, Cr 12%, Mo 1% Hrc 60- 61

Sandvik 12C27
Swedish stainless steel.
A martensitic stainless steel with a hardness range of 54 - 61 HRC. High toughness, scary sharpness, and good corrosion resistance make Sandvik 12C27 the recommended
grade for hunting knives, camping knives, and pocket knives.
C 0.60 Cr 13.5 Mn 0.40 Si 0.40

N690Co
Cobalt enriched stainless steel from Austrian steel company Bohler. The added Cobalt improves wear resistance and edge retention in addition to ensuring a uniform grain structure.
C 1.07 Co 1.5 Cr 17 Mn 0.4 Mo 1.1 Ni-P-Si 0.4 S-W-V 0.1

ELMAX
Powder metallurgy stainless steel with high wear resistance, high compressive strength, superior corrosion resistance, and good dimensional stability, or the ability to retain it's size and
form even after taking abuse. ELMAX gives a blade superior edge retention and is easily sharpened.
C 1.7 Si .8 Mn .3 Cr 18.0 Mo 1.0 V 3.0

One of my customers has the following tips for EnZo blades in D2:
- if making other than slicing cuts in soft materials (not including bone or wood with knots), make sure the blade has a microbevel at the
edge, to avoid chipping. This way, even chopping will cause no problems.
- use aluminum oxide stones/waterstones for sharpening if you want quick results.
- this steel is not stainless, so it needs to be wiped dry if it gets wet. However, D2 will not oxidize as quickly as simple carbon steel, so your
blade will remain bright with minimum care.

October '08 Knives Illustrated: "If I wanted a beautiful knife in a more traditional pattern that takes a very good edge,
the EnZo Trappers stands head and shoulders above the rest".

Please note that the blade finish may differ from the picture.

	5834 Brisa Trapper 95 ELMAX/ScZ $100.00 OUT OF STOCK Blade Length: 95mm (3.75 inches) Blade Width: 2 mm Blade Thickness: 3.6 mm Total Length: 210 mm Holes: 2x4.65 mm, 1x6.3 mm, 4x3.2 mm Ground: Scandi Zero Finish: Satin
	5835 Brisa Trapper 95 ELMAX/F $100.00 4 in stock Blade Length: 95mm (3.75 inches) Blade Width: 26 mm Blade Thickness: 3.6 mm Total Length: 210 mm Weight: 120g Holes: 2x4.65mm, 1x6.4mm Ground: Full Flat Finish: Satin
	5836 Brisa Trapper 95 N690Co/Sc $60.00 OUT OF STOCK Blade Length: 95mm (3.75 inches) Blade Width: 26mm Blade Thickness: 3.6mm Total Length: 210mm Holes: 3x4.6mm, 1x6.4mm, 4x3.1mm, 2x4.3mm Ground: ScZ Finish: Satin
	5837 Brisa Trapper 95 N690Co/F $60.00 2 in stock Blade Length: 95mm (3.75 inches) Blade Width: 26mm Blade Thickness: 3.6mm Total Length: 210mm Holes: 2x4.65mm, 1x6.4mm Ground: Flat Finish: Satin
	5838 EnZo Trapper 95 D2/ScZ $61.00 1 in stock Blade Length: 95mm (3.75 inches) Blade Width: 26mm Blade Thickness: 3.6mm Total Length: 210mm Holes: 2x4.6 mm (Corby), 1x6.3 mm (Lanyard Tube) Ground: Scandi Zero Grind Finish: Satin
	5839 Brisa/EnZo Trapper 95 O1/ScZ $48.00 OUT OF STOCK Blade Length: 95mm (3.75 inches) Blade Width: 26mm Blade Thickness: 3.5mm Total Length: 210mm Holes: 2x4.65mm, 1x6.4mm Ground: Scandi, Zero grind Finish: Satin
	5840 EnZo Trapper 95 D2/F $61.00 1 in stock Blade Length: 95mm (3.75 inches) Blade Width: 26mm Blade Thickness: 3.5mm Total Length: 210mm Holes: 2x4.65mm, 1x6.4mm Ground: Flat
	5842 Brisa Trapper 95 O1/F $52.00 2 in stock Blade Length: 95mm (3.75 inches) Blade Width: 25mm Blade Thickness: 3.5mm Total Length: 207mm Holes: 2x4.6mm, 1x6.4mm Ground: Flat
	5850 EnZo Trapper 115 Elmax/ScZ $110.00 OUT OF STOCK Blade Length: 115mm (4.5 inches) Blade Width: 26mm Blade Thickness: 3.6mm Total Length: 225mm Holes: 2x4.6mm, 1x6.4mm, 4x3.2mm Ground: ScZ
	5851 EnZo Trapper 115 Elmax/F $110.00 3 in stock Blade Length: 115mm (4.5 inches) Blade Width: 26mm Blade Thickness: 3.6mm Total Length: 225mm Holes: 2x4.3mm, 4x3.2mm,1x6.3mm Ground: Flat