Nordic Knife Design - Finland

A new line of blades from Dennis Holmbacka.




Forester
1005 Forester 100  $34.00
2 in stock

Blade Length: 100mm  Width:  25mm
Thickness: 4.2mm  Total: 215mm
Holes:  Corby 2x4.7mm  Lanyard: 6.4mm
Grind: Scandi  Grind angle: 23
Steel: ThyssenKrupp 80CrV2 Carbon  HRC: 58-59

Designed specifically for bushcrafting and hunting.  The thicker blade allows for chopping branches.
The large handle cut out allows the knife to be well balanced in the hand.
The blue/brown factory finish is a result of the heat treating process.  As such, the blade is intended for use rather than show.


Santoku
1120 Santoku 165  $38.00
2 in stock

Blade Length: 163mm  Width:  50mm
Thickness: 2.5mm  Total: 290mm
Holes:  Corby 3x4.7mm 
Grind: Flat  Grind angle: 32
Steel Sandvik Stainless 12C27  HRC: 57-58

Timber 85
1205 Timber 85  $26.00
4 in stock

Blade Length: 85mm  Width:  25mm
Thickness: 3.2mm  Total: 210mm
Grind: Scandi  Zero  Grind angle: 23
Steel: ThyssenKrupp 80CrV2 Carbon  HRC: 58-59

Designed for woodworking.  The slightly curved back of the blade meets the edge in a fine, severe point allowing for detailed woodworking.  The angle of the grind increases from 23 to 28 degrees towards the tip for better support and strength.


 Timber 95
1210 Timber 95  $27.00
4 in stock

Blade Length: 95mm  Width:  25mm
Thickness: 3.3mm  Total: 210mm
Grind: Scandi  Zero  Grind angle: 23
Steel: ThyssenKrupp 80CrV2 Carbon  HRC: 58-59

A general purpose blade for woodworking, dressing game, bushcrafting and camping.

 Korpi
1250 Korpi 90  $34.00
1 in stock

Blade Length: 90mm  Width:  19mm
Thickness: 3.7mm  Total: 203mm
Holes:  Corby 2x4.7mm  Pin: 4x3.1mm
Grind: Scandi  Grind angle: 23
Steel: Sandvik Stainless 14C28N  HRC: 58-59

A full tang blade with the profile of the original Tommi Puukko. 

Lizard
1305 Lizard  $34.00
OUT OF STOCK

Blade Length: 75mm  Width:  24mm
Thickness: 3.2mm  Total: 171mm
Holes:  Corby 2x4.7mm  Lanyard: 6.4mm
Grind: Flat  Grind angle: 32
Steel: Sandvik Stainless 12C28  HRC: 57-58

1320 Beaver  $39.00
2 in stock

Blade Length: 60mm  Width:  26mm
Thickness: 4mm  Total: 165mm
Holes:  Corby 2x4.7mm  Lanyard: 6.4mm
Grind: Flat  Grind angle: 32
Steel: Sandvik Stainless 14C28N  HRC: 58-59