Polar Knife Blades

       Polar blades are a collaboration between Brisa and Lauri.
Sharp blades with the right geometry for cutting. Traditional scandi grind.
       Blades with a stamp are manually sharpened resulting in a better edge than
the Lauri blades.
Same steel as the Lauri blades, but have a rectangular ricasso making it
easier to fit the bolster.

	5252 Hammered 77x21 mm $19.50 Stamped OUT OF STOCK Bolster 3571, 3576
	5262 95x20 mm $15.25 Stamped OUT OF STOCK Bolster: 3571, 3576
	5260 71x25 mm $15.50 Stamped OUT OF STOCK Blade Thickness: 3.2 mm Total Length: 198 mm Bolster: 3572, 3576
	5261 85x17 mm $15.00 Stamped OUT OF STOCK Bolster: 3572, 3576
	5263 75x20 mm $12.00 Stamped 5 in stock Bolster: 3571, 3579
	5265 Whittler 80x23 mm $18.00 Stamped 3 in stock Bolster: 3572, 3576 A good alternative is the Lauri carbon 5108
	5258 Whittler 54x16 mm $10.00 Stamped 5 in stock Bolster: 3579
	5259 62x18 mm $12.00 Stamped 6 in stock Bolster: 3571, 3576
	5267 Skinner 90x27 mm $20.00 Stamped 3 in stock Bolster: 3575, 3585
	5268 125x20 mm $20.00 Stamped 4 in stock Bolster: 3571, 3576
	5270 Hammered 62x15 mm $17.00 Stamped 3 in stock Bolster: 3571
	5272 Hammered 95x20 mm $20.00 Stamped 1 in stock Bolster: 3571, 3576
	5273 82x24 mm $18.00 Stamped 2 in stock Bolster: 3572, 3576
	5253 240x 40 mm $73.00 Stamped 2 in stock Blade thickness 3 mm Total 370 mm HRC 59 Ferrule 3605 Bolster 3585

Steel analysis
C-0,81 Mn-0,56 S-0,004 P-0,01 Si 0,35 V-0,161 Cr-0,54